Home > Product Line > Heat Sink > Heat Sink (Cooling) by MERSEN
Heat Sink (Cooling) by MERSEN
Fabfin® is a fabricated heatsink with a height to fin spacing ratio greater than an extruded section. Fabfin® can be supplied essentially of any size where a multitude of aluminum fins of varying heights and thickness are attached by a swaging process to an aluminum baseplate of variable thickness, length and width, on four standard fin spacings. These standard spacing are designated as an FF (8.51 mm), DF (6.86 mm), AF (5.49 mm), or MF (3.43 mm) series. Typical alloy is 6063 for both fins and baseplate. Finishes are numerous. No glue is used in the process.
Features
- Fabricated
- Multiple fins joined to baseplate by swaging process
- Metal to metal construction. Al/Al Cu/Al Cu/Cu
- Immensely rugged
- No epoxy/glue used in fabrication process
- No thermal barrier at fin to baseplate join
- Fin height to spacing ratio much greater than extruded section
- -400C to + 3500C storage and operating range
- Capable of withstanding extensive vibration
- Tongue and groove construction
- Baseplates can be welded together with fins attached
- Multiple fins joined to baseplate by swaging process
- Metal to metal construction. Al/Al Cu/Al Cu/Cu
- Immensely rugged
- No epoxy/glue used in fabrication process
- No thermal barrier at fin to baseplate join
- Fin height to spacing ratio much greater than extruded section
- -400C to + 3500C storage and operating range
- Capable of withstanding extensive vibration
- Tongue and groove construction
- Baseplates can be welded together with fins attached
Specification
- Pitch: 3.43mm、5.49mm、6.86mm、8.51mm
- High: 118mm
- High: 118mm